Car-Rep

Specialists in car products

Car-Rep® makes it easy to restore, repair and tune your car. Whether you're treating your car's interior or exterior, we have products to meet your needs. Car-Rep® offers a full range of quality products for DIY car enthusiasts and Car-Rep® professionals.

RUBBERcomp

RUBBERcomp® is a multi-purpose, air drying specialty rubber coating. It can be easily applied by spraying. It protects coated items against moisture, acids, abrasion, corrosion, and skidding /slipping, and provides a comfortable, controlled grip. RUBBERcomp® remains flexible and stretchy over time, and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Available sizes: spray 400ml, cans: 250ml, 1L, 3L and thinner 450. See more: www.rubbercomp.com VIDEO RUBBERcomp

Limit search

  • Spray Car-Rep RUBBERcomp Red semigloss 400ml

    Spray Car-Rep RUBBERcomp Red semigloss 400ml

    *RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions from -30°C to +90°C. Easy to peel off. *Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary.

    Read more
  • Spray Car-Rep RUBBERcomp Rust Effect matt 400ml

    Spray Car-Rep RUBBERcomp Rust Effect matt 400ml

    *RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating.* It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions from -30°C to +90°C. Easy to peel off. *Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary.

    Read more
  • Spray Car-Rep RUBBERcomp Smoke grey semigloss 400ml

    Spray Car-Rep RUBBERcomp Smoke grey semigloss 400ml

    *RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions from -30°C to +90°C. Easy to peel off. *Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary.

    Read more
  • Spray Car-Rep RUBBERcomp Transparent high gloss 400ml

    Spray Car-Rep RUBBERcomp Transparent high gloss 400ml

    *RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions from -30°C to +90°C. Easy to peel off. *Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary.

    Read more
  • Spray Car-Rep RUBBERcomp Transparent matt 400ml

    Spray Car-Rep RUBBERcomp Transparent matt 400ml

    *RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions from -30°C to +90°C. Easy to peel off. *Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary.

    Read more
  • Spray Car-Rep RUBBERcomp Wheelsilver high gloss 400ml

    Spray Car-Rep RUBBERcomp Wheelsilver high gloss 400ml

    *RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions from -30°C to +90°C. Easy to peel off. *Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary.

    Read more
  • Spray Car-Rep RUBBERcomp White semigloss 400ml

    Spray Car-Rep RUBBERcomp White semigloss 400ml

    *RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions from -30°C to +90°C. Easy to peel off. *Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary.

    Read more
  • Spray Car-Rep RUBBERcomp Yellow semigloss 400ml

    Spray Car-Rep RUBBERcomp Yellow semigloss 400ml

    *RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions from -30°C to +90°C. Easy to peel off. *Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary.

    Read more